|
|
 You
need (4) NAPA part # 264-3658 @ $15). Or, for Ford parts, you need (4) F65Z-3B236-BB cam bolts
and (4) F65Z-3C178-AA cam washers. Cost is roughly the same as the
NAPA parts. |
|
|
|
cam bolts |
|
|
|
You
need (4) NAPA part # 264-3658 @ $15). Or, for Ford parts, you need (4) F65Z-3B236-BB cam bolts
and (4) F65Z-3C178-AA cam washers. Cost is roughly the same as the
NAPA parts. |
|
|
© 05/23/2007 Tim Skelton
The factory suspension cannot be adjusted for
camber when the suspension is lowered. To solve this problem, cam
bolts are used.
The cam bolts allow the upper a-arm to come in or out as needed
to set camber.
This
photo compares the NAPA parts (top) with the Ford parts. The cams
on the Ford parts are 1.4", versus 1.3" for the NAPA parts, so they
allow a bit more adjustment range. Plus, after a few years of
service, the d-holes in the NAPA cams were distorted, which could rob
you of a few precious degrees of adjustment range.